XCubeSAN XS5200 Series

Dual-active controller (Model : XS5224D / XS5216D / XS5212D / XS5226D)

Single-upgradable controller (Model : XS5212S / XS5226S)

Intel^® Xeon^® 4-core processor (8-core processor models are also available)

DDR4 ECC 8GB, up to 128GB (four DIMM slots, insert two DIMMs or more will boost performance)

Host Card Slot 1 (optional)

• 4 x 16Gb FC (SFP+) ports
• 2 x 16Gb FC (SFP+) ports
• 4 x 10GbE iSCSI (SFP+) ports
• 2 x 10GbE iSCSI (RJ45) ports
• 4 x 1GbE iSCSI (RJ45) ports

Host Card Slot 2 (optional)

• 4 x 16Gb FC (SFP+) ports (Slot 2 provides 20Gb bandwidth)
• 2 x 16Gb FC (SFP+) ports (Slot 2 provides 20Gb bandwidth)
• 4 x 10GbE iSCSI (SFP+) ports (Slot 2 provides 20Gb bandwidth)
• 2 x 10GbE iSCSI (RJ45) ports
• 4 x 1GbE iSCSI (RJ45) ports

Onboard

• 2 x 10GBASE-T iSCSI ports
• 1 x 1GbE management port

XS5224 / XS5216 / XS5212

• Mix & match 3.5" 2.5" SAS, NL-SAS, SED HDD
• 2.5” SAS, SATA SSD (6Gb MUX board needed for 2.5" SATA drives in dual controller system)

XS5226

• 2.5" SAS, NL-SAS, SED HDD
• 2.5” SAS, SATA SSD (6Gb MUX board needed for 2.5" SATA drives in dual controller system)

• XD5324 (4U 24-bay, LFF)
• XD5316 (3U 16-bay, LFF)
• XD5312 (2U 12-bay, LFF)
• XD5326 (2U 26-bay, SFF)

• XS5224 (4U 24-bay, LFF) : 624
• XS5216 (3U 16-bay, LFF) : 626
• XS5212 (2U 12-bay, LFF) : 612
• XS5226 (2U 26-bay, SFF) : 626

19” Rackmount

• XS5224 (4U 24-bay, LFF) : 170.3 x 438 x 515 mm
• XS5216 (3U 16-bay, LFF) : 130.4 x 438 x 515 mm
• XS5212 (2U 12-bay, LFF) : 88 x 438 x 515 mm
• XS5226 (2U 26-bay, SFF) : 88 x 438 x 491 mm

Cache-to-Flash module (optional)

• Battery backup module + Flash module (to protect all memory capacity)
• Super capacitor module + Flash module (to protect up to 16GB memory per controller)

USB LCM (optional)

770W/850W 1+1 redundant

80 PLUS Platinum

• RAID level 0 ,1 ,0+1 ,3 ,5 ,6 ,10 ,30 ,50, 60, and N-way mirror
• RAID EE level 5EE, 6EE, 50EE, and 60EE
• Flexible storage pool ownership
• Thin Provisioning (QThin) with space reclamation
• SSD Cache (QCache¹)
• Auto Tiering (QTiering¹)
• Global, local, and dedicated hot spares
• Write-through and write-back cache policy
• Online disk roaming
• Spreading RAID disks drives across enclosures
• Background I/O priority setting
• Instant RAID volume availability
• Fast RAID rebuild
• Online storage pool expansion
• Online RAID level migration
• Online volume extension
• Online volume migration²
• Auto volume rebuilding
• Instant volume restoration
• SED & ISE drive support
• Video editing mode for enhanced performance
• Disk drive health check and S.M.A.R.T. attributes
• Storage pool parity check and media scan for disk scrubbing
• SSD wear lifetime indicator
• Disk drive firmware batch update

• Proven QSOE 2.0 optimization engine
• CHAP & mutual CHAP authentication
• SCSI-3 PR (Persistent Reservation for I/O fencing) support
• iSNS support
• VLAN (Virtual LAN) support
• Jumbo frame (9,000 bytes) support
• Up to 256 iSCSI targets
• Up to 512 hosts per controller
• Up to 1,024 sessions per controller

• Proven QSOE 2.0 optimization engine
• FCP-2 & FCP-3 support
• Auto detect link speed and topology
• Topology supports point-to-point³ and loop
• Up to 256 hosts per controller

• Dual-Active (Active/Active) SAN controllers
• Cache mirroring through NTB bus
• ALUA support
• Management port seamless failover
• Fault-tolerant and redundant modular components for SAN controller, PSU, FAN module, and dual port disk drive interface
• Dual-ported HDD tray connector
• Multipath I/O and load balancing support (MPIO, MC/S, Trunking, and LACP)
• Firmware update with zero system downtime

• Secured Web (HTTPS), SSH (Secure Shell)
• iSCSI Force Field to protect from mutant network attack
• iSCSI CHAP & mutual CHAP authentication
• SED & ISE drive support

• Thin Provisioning (QThin) with space reclamation
• Auto Tiering (QTiering¹) with 3 levels of storage tiers

• DHCP, Static IP, NTP, Trunking, LACP, VLAN, Jumbo frame (up to 9,000 bytes)

• Snapshot (QSnap), block-level, differential backup
  • Writeable snapshot support
  • Manual or schedule tasks
  • Up to 64 snapshots per volume
  • Up to 64 volumes for snapshot
  • Up to 4,096 snapshots per system
• Remote Replication (QReplica)
  • Asynchronous, block-level, differential backup based on snapshot technology
  • Traffic shaping for dynamic bandwidth controller
  • Manual or schedule tasks
  • Auto rollback to previous version if current replication fails
  • Up to 32 schedule tasks per controller
• Volume clone for local replication
• Configurable N-way mirroring
• Integration with Windows VSS (Volume Shadow Copy Service)
• Instant volume restoration
• Cache-to-Flash memory protection¹
  • M.2 flash module
  • Power module: BBM (Battery Backup Module) or SCM (Super Capacitor Module)
• Support USB UPS and network UPS with SNMP management

• Server Virtualization & Clustering
• Latest VMware vSphere certification
• VMware VAAI for iSCSI & FC
• Windows Server 2016, 2012 R2 Hyper-V certification
• Microsoft ODX
• Latest Citrix XenServer certification

• USB LCM¹, serial console support, online firmware update
• Intuitive Web management UI, secured web (HTTPS), SSH (Secured Shell), LED indicators
• S.E.S. support, S.M.A.R.T. support, Wake-on-LAN, and Wake-on-SAS

• 80 PLUS Platinum power supply
• Wake-on-LAN to turn on or wake up the system only when necessary
• Auto disk spin-down

• Windows Server 2008, 2008 R2, 2012, 2012 R2, 2016
• SLES (SUSE Linux Enterprise Server) 10, 11, 12
• RHEL (Red Hat Enterprise Linux) 5, 6, 7
• CentOS (Community ENTerprise Operating System) 6, 7
• Solaris 10, 11
• Free BSD 9, 10
• Mac OS X 10.11 or later

System : 3 years
Battery backup module : 1 year
Super capacitor module : 1 year

Operating temperature : 0 to 40°C
Shipping temperature : -10 to 50°C

Operating relative humidity : 20% to 80% non-condensing
Non-operating relative humidity : 10% to 90%